Stm 4.0 For Windows 7
Click Here ===== https://urllio.com/2tawsm
For the firmware update to be successful, it is necessary that windows ten pro 64 bit 21H1 will install (when the interactive display is connected and after checking the windows ten update) the STM device in dfu mode update (see the picture below).
The firmware update of the STM device will be performed using the screen, the STM device will be active during the update process. (The STM device will not be active during the install process - this must be performed using the computer)
Once the device is dfu mode, the windows ten update will be performed. (You may need to repeat the procedure several times until the update is successful. The windows ten update is performed in this way because the firmware update is only temporarily saved).
In order to update the firmware, it is necessary to:
Turn on the device.
Open the prompt of the device. In order to open the prompt, in windows 10: Settings -> System -> Update and recovery -> Troubleshoot -> Open the prompt
To check the windows update, press the del key and then release on the keypad. (only for del screen) then, press Windows key + W. In the windows update screen, click on the Windows Update symbol. If the download is successful, the window will close and the windows update will be downloaded. Once the download completes, the windows update will be installed.
It is also possible to update the firmware of the STM device without connected the interactive display by using the Cloud setup, but you can not update the firmware without checking the windows update.
5. Connect the STM device to the interactive display and turn on the interactive display. You will see the interactive display warning message, and the STM device will do the updates in the STM device.
The 90 Day trial version will let you print your photo projects and export them, and you can keep in touch with your project's processing status. It will also help you understand how your photo editing tools work and you can download the software in the 14 day trial version free of charge. 827ec27edc